Historical

ASTM B393-05

Standard Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate


1.1 This specification covers five grades of wrought niobium and niobium alloy strip, sheet, and plate as follows:

Note 1—Committee B10 has adopted "niobium" as the designation for Element No. 41, formerly named "columbium."

1.1.1 R04200-Type 1— Reactor grade unalloyed niobium,

1.1.2 R04210-Type 2— Commercial grade unalloyed niobium,

1.1.3 R04251-Type 3— Reactor grade niobium alloy containing 1 % zirconium, and

1.1.4 R04261-Type 4— Commercial grade niobium alloy containing 1 % zirconium.

1.1.5 R0xxxx-Type 5— RRR grade pure niobium.

Note 2—This grade of niobium is used in superconducting applications that require the ultra high purity. Because of the high purity the product is conducive to very large grains that can adversely affect formability. It is not recommended for other applications.

1.2 Except for dimensional tolerances in Table 1, the values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

1.3 The following precautionary caveat pertains only to the test methods portion of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.


CONTENT PROVIDER
ASTM International [astm]

Others Also Bought
Standard Specification for Niobium and Niobium Alloy Seamless and Welded Tubes
Document History
Revises:
Revised By:
Included in Packages
This standard is not included in any packages.
Amendments & Corrections
We have no amendments or corrections for this standard.