Most recent
DIN EN 1993-1-10:2010
Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties; German version EN 1993-1-10:2005 + AC:2009
EN 1993-1-10 contains design rules for selecting and specifying steel materials that are resistant to failure by brittle fracture and lamellar tearing.*CEN/TC 250 decided in 2008 that no revision of the Eurocodes shall be carried out at least until March 2013. Necessary amendments and corrigenda of the Eurocodes may be published until March 2013. This decision led to a large number of amendments and corrigenda, which were mostly published as separate documents. For better organization and applicability of these documents, the DIN prepares consolidated versions as new versions for all parts of the Eurocode affected by this. These documents then contain the current amendments and corrigenda. In this context, the mentions of replacement on the Eurocodes are also supplemented accordingly. A new edition is also published, even if only the superseding note is to be supplemented. DIN EN 1993-1-10 contains guidance for the selection of steel for fracture toughness and for through thickness properties of welded elements where there is a significant risk of lamellar tearing during fabrication. European Amendment EN 1993-1-10:2005/AC:2009 has been incorporated into this new edition. The Committee responsible for this standard is NA 005-08-16 AA "Tragwerksbemessung (Sp CEN/TC 250/SC 3)" ("Design of structures (Mirror Committee of CEN/TC 250/SC 3)") at DIN.
Deutsches Institut für Normung [din]