Historical
SAE AMS 4165H-2003 (SAE AMS4165H-2003)
Aluminum Alloy, Extrusions 4.4Cu 1.5Mg 0.60Mn (2024-T3511) Solution Heat Treated, Stress-Relieved by Stretching, and Straightened ( Reaffirmed: May 2008 )
This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing. These extrusions have been used typically for parts subject to excessive warpage during machining due to residual stresses and for parts requiring high strength and whose fabrication does not normally involve welding, but usage is not limited to such applications. Certain processing procedures may cause these extrusions to be susceptible to stress-corrosion cracking; SAE ARP 823 recommends practices to minimize such conditions.
CONTENT PROVIDER
Society of Automotive Engineers [sae]
Society of Automotive Engineers [sae]