Historical
SAE AMS 6345B-2007 (SAE AMS6345B-2007)
Steel, Sheet, Strip, and Plate 0.95Cr 0.20Mo (0.28 - 0.33C) Normalized or Otherwise Heat Treated
This specification covers an aircraft-quality, low-alloy steel in the form of sheet, strip, and plate. These products have been used typically where welding and moderate tensile properties are required, but usage is not limited to such applications. Sheet and strip are extensively used where minimum tensile strength of 180 ksi (1241 MPa) is required in sections up to 0.125 inch (3.18 mm) in nominal thickness and proportionately lower strength is required in heavier thicknesses.
CONTENT PROVIDER
Society of Automotive Engineers [sae]
Society of Automotive Engineers [sae]